About our Oil Lamps
oil lamps are a combination of copper and glazed ceramics. This product has
been on our market for 14 years. These designs are one-of-a-kind and perfect
for a gift or for your decor.
in the house or on a porch outside, you are sure to love these incredible
lamps. We use glass globes to contain the design. This allows for added safety
around the flame. Our oil lamps use PARAFFIN oil. This is smokeless, odorless,
and burns a nice, clean flame. This oil will not ignite or cause any additional
wicks are FIBERGLASS. We guarantee them for the life of your product. Do not
trim or remove any part of the wick. It never needs replacement or trimming.
When you are finished with the lamp, blow it out and walk away. Re-light
whenever you wish.
RECOMMEND ULTRA PURE OIL - Distributed by ACE Hardware and also available at
Michael's and Hobby Lobby or other craft stores.
Q: Why do you have limited items on your web page?
A: All of our products are
Hand-made and Hand-built. We do not use any molds or machinery. We can create
similar designs but no two pieces will be exactly the same.
Q: I have an oil lamp and my wick is not burning?
A: Trouble-shooting the
wick can be challenging. SImply follow these steps:
Check the wick size. Is there enough at the tip to burn properly? It should be
about 1/8" to 1/4" high. Caution: Do NOT pull the wick up too high
and/or cut the ends. This may shorten the wick and cause it to not work
properly. Each wick is exactly the length needed to function properly.
Check the bottom of the base. There is a small hole where you should be able to
see the wick at the bottom of the copper stem. If you DO NOT see a wick, the
wick is too short. If you see the wick, it should be working properly.
Check the oil you are using. Imitation oils and ones with large amounts of
water or alcohol may not function or take a bit longer to light up. We recommend
ULTRA PURE brand oil available through Ace Hardware, Hobby Lobby, or Michael's.
We also carry it at our shows, so come see us!
If you are still having problems, please contact us directly so we can better
assist you and/or send you a new wick. The wicks are fiberglass and NEVER need to be replaced.